TRX250r.org

Author Topic: Anyone have a CRF450 dirt bike?  (Read 2495 times)

Offline havinnoj

Anyone have a CRF450 dirt bike?
« on: April 17, 2016, 09:13:30 PM »
Looking to use a CRF450 dirt bike rear brake master cylinder so if someone has one and can measure the distance between the center of the bolt holes, that would be much appreciated.  Thanks in advance.

Online croat1

Anyone have a CRF450 dirt bike?
« Reply #1 on: April 18, 2016, 01:27:35 AM »
[MENTION=540]JesseA420[/MENTION]
A few Laegers
1987 oem
Mission: Back to Basics.  On the trail or dune

Offline JesseA420

Anyone have a CRF450 dirt bike?
« Reply #2 on: April 18, 2016, 06:59:40 AM »
crf master bolt spacing is 49mm :)
Quote from: Hawaiiysr;66760
Yup i sucked the head. taste like dirt.

[/FONT]

Offline havinnoj

Anyone have a CRF450 dirt bike?
« Reply #3 on: April 18, 2016, 01:44:00 PM »
Quote from: JesseA420;66690
crf master bolt spacing is 49mm :)

Thank you sir!  I'm considering (what I assume to be a late 80's - early 90's cr250 master cylinder) that is on an aftermarket frame.  It measured about 50mm so I assume the crf450 will fit.

Offline JesseA420

Anyone have a CRF450 dirt bike?
« Reply #4 on: April 18, 2016, 03:16:11 PM »
wallow out the holes a smidge and it should bolt right up!
Quote from: Hawaiiysr;66760
Yup i sucked the head. taste like dirt.

[/FONT]

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38