Author Topic: concept FOS cylinder (Read 11265 times)

troybilt · « **Reply #1 on:** August 06, 2013, 07:46:37 PM »

what's FOS cylinder?

rsss396 · « **Reply #2 on:** August 06, 2013, 08:42:58 PM »

Frits Overmars Scavenging I believe, I know Frits Overmars is who designed it and he is the guy on the right in the picture above. He is another Aprilla engineer\
That cylinder was made on a 3D printer!

C-Leigh Racing · « **Reply #3 on:** August 07, 2013, 08:37:00 PM »

Ol Frits, boy hes something aint he.
Just think if these guys knew what we know, where we find out, probably be less 4 strokes in this worlld.
Neil

937ampd · « **Reply #4 on:** August 07, 2013, 09:09:18 PM »

Those 3D printers are crazy!!!!! Oh, you need a new cylinder? Let me pull up the specs and print you one out. Some day in the future we'll be printing everything.

rsss396 · « **Reply #5 on:** August 07, 2013, 11:32:43 PM »

we have been very lucky jan and frits have been so public with all there knowledge, they both could have taken so much to the grave with them.

rsss396 · « **Reply #6 on:** August 07, 2013, 11:36:35 PM »

3D is definitely the future but we are still in its early stages, if I remember frits was not the happiest with the properties unless I was thinking of another cylinder that done by a different shop. One had excellent luck the other not so great

937ampd · « **Reply #7 on:** August 08, 2013, 12:18:07 AM »

Just crazy to think someone printed a cylinder, as a matter of fact it's absolutely 'effin nuts!!!! I'm sure with time it'll only improve but I had no idea, just thought they were making cups and spatulas and such with them. Some awesome threads you come up with!!!

Fear250r · « **Reply #8 on:** August 08, 2013, 11:16:26 PM »

Very cool!!

I think I need to move towards 3D printing...this printing on paper shat is a dying industry...

Rupp250 · « **Reply #9 on:** August 09, 2013, 10:12:25 AM »

Until people stop using paper for packaging it won't. Just need to redirect your efforts.

<<
I know there are some badass 3D printers out there doing amazing stuff, but why does it look like there is casting marks on those?

rsss396 · « **Reply #10 on:** August 09, 2013, 10:56:47 AM »

I see those cast like marks but just like a program for a cnc machine those lines can be accidentally left during modeling, some of the programmers around here can better explain that than me.

Rupp250 · « **Reply #11 on:** August 09, 2013, 12:34:23 PM »

What are the small holes around the top above where the sleeve would be. Coolant passages? Does the head fit into it?

rsss396 · « **Reply #12 on:** August 09, 2013, 01:13:11 PM »

The head insert drops down in and those are water passages, I added a picture showing water flow, also notice how water cools the inside transfer ducts

udontknowme · « **Reply #13 on:** October 28, 2013, 07:52:41 PM »

i believe the frits cylinder is up and running atleats thats how i understood it. he said something about having a bike at some race and it won so i assumed it was his new design. it was predicted to surpass the rsa performance :encouragement: wish i knew even a fraction of what that guy knows