TRX250r.org

Author Topic: LED or Robl intake for air-box eliminator?  (Read 1140 times)

Offline hickwheeler

LED or Robl intake for air-box eliminator?
« on: August 02, 2018, 04:15:28 AM »
Looking at getting one of these setups for a airbox eliminator. Seeing which one others would go with.
« Last Edit: August 10, 2018, 10:42:22 AM by Tbone07 »
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline Sand_Blaster

Re: Led or robl
« Reply #1 on: August 02, 2018, 06:42:06 PM »
I have both and like both. I just got done mounting my LED and I really like it. The filter is massive!
87 Trx250r & 99 Banshee

Offline hickwheeler

Re: Led or robl
« Reply #2 on: August 02, 2018, 08:07:20 PM »
Did you mount it up with the Elka shock. If so how was fitment
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline Sand_Blaster

Re: Led or robl
« Reply #3 on: August 02, 2018, 10:28:42 PM »
I did and it is a tight fit.
87 Trx250r & 99 Banshee

Offline hickwheeler

Re: Led or robl
« Reply #4 on: August 02, 2018, 11:14:06 PM »
Is it going to clear when the suspension cycles
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline hickwheeler

Re: Led or robl
« Reply #5 on: August 02, 2018, 11:17:19 PM »
You have any pics of the Robl mounted? Or would you be willing to mount it and take pics?
« Last Edit: August 10, 2018, 10:41:08 AM by Tbone07 »
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline sameltoe

Re: Led or robl
« Reply #6 on: August 03, 2018, 11:26:40 AM »
Robl was my choice.
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline Sand_Blaster

Re: Led or robl
« Reply #7 on: August 03, 2018, 05:15:52 PM »
I guess I have a older robl mines different then Sam's. Kinda looks like OJ has a robl to.
87 Trx250r & 99 Banshee

Online jcs003

Re: Led or robl
« Reply #8 on: August 03, 2018, 05:40:36 PM »
that carbon fiber looks awesome.  no worries about corrosion too.

Offline hickwheeler

Re: Led or robl
« Reply #9 on: August 03, 2018, 05:43:47 PM »
I guess I have a older robl mines different then Sam's. Kinda looks like OJ has a robl to.
If it is what you got from Jared. It is probably a prototype
88 330 worked over by Pete
88 ct350pv (BOF Build)
89 440 Packard built pilot  (Sold)

Offline Sand_Blaster

Re: Led or robl
« Reply #10 on: August 03, 2018, 10:08:20 PM »
Ahh dang thanks for info. I Didn't know it was a proto. The wait for a led is 3-4 weeks right now I hear, not sure if time is a issue?
87 Trx250r & 99 Banshee

Offline Skeans1

Re: Led or robl
« Reply #11 on: August 04, 2018, 12:08:00 AM »
They were prototype puma intakes, the led I had the boot rubbed through on the frame and elka after a few rides

Offline havinnoj

Re: Led or robl
« Reply #12 on: August 06, 2018, 12:07:42 PM »
Canít comment on fitment on stock chassis / linkage but this is how mine is mounted.  Credit goes to Pete @ Hybrid for utilizing the ESR hangers.

Online 2Nubs

Re: Led or robl
« Reply #13 on: August 06, 2018, 01:17:56 PM »
Dang that looks slick!! I hate to fix something that isn't broke but I might see about one of these to replace my ESR intake/air box elimination.

Sameltoe, I like those MS-21919 clamps you used for mounting the bracket haha I have bags of them that are out of date for aviation use.
« Last Edit: August 06, 2018, 01:24:40 PM by 2Nubs »
Ď86 330

Online 2Nubs

Re: Led or robl
« Reply #14 on: August 06, 2018, 01:20:18 PM »
Ahh crap... that ain't going to work with a center mount pipe.
Ď86 330