See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: starting my build
Nice work Douglas.
March 08, 2018, 10:13:04 PM |
1 |
|
Re: New member new project
Received my wheels today. Hopefully i get my shocks and a arms in this week as well.
March 12, 2018, 08:51:58 PM |
1 |
|
Re: starting my build
I would take that reed block out and machine half off!
March 13, 2018, 12:38:58 PM |
1 |
Re: starting my build
maybe just switch to a v force. I runn that on my banshee or a RAD valve March 13, 2018, 01:04:44 PM |
1 |
|
Re: starting my build
Get a cr250 intake boot that should put it close to what you need.
March 13, 2018, 02:30:48 PM |
1 |
|
Re: starting my build
I think around 99 to 01. You might have to cut the snuffer off it. I have a Cr reed and boot setup and you have to run a reed spacer to get the alignment right. I do believe mine is a 99. It has the snuffer built into the intake. I'll get pics when I get home.
March 13, 2018, 04:40:19 PM |
1 |
|
Re: starting my build
On my 330 pro x cylinder. With vf2 reeds and a stock intake. My alignment was not great. I had to pull the carb down to meet with the intake. I really didn't think of it has much of an issue. It was also a brand new stock intake.
March 25, 2018, 12:17:42 PM |
1 |
|
Re: New member new project
Forgot to add file.
March 30, 2018, 05:12:18 PM |
1 |
|
Re: New member new project
Sand_Blaster I have PEP for the fronts.
April 02, 2018, 09:04:37 PM |
1 |
|
Re: starting my build
Glad you're finding the fun in the alignment issue @DOUGLAS!
April 18, 2018, 01:34:21 PM |
1 |
