Author Topic: Guys with 350s (Read 14187 times)

Saber569r · « **Reply #30 on:** February 02, 2016, 04:56:28 PM »

Quote from: Skeans1;64090

How does that set up compare to your sphinx?

I'd say the the hybrid Sphinx is about two quad lengths faster the my 350. But this in straight line drags or the big cinder hills. The crap Sphinx I bought before yours was about the same as the 350.

fast350r · « **Reply #31 on:** February 02, 2016, 05:11:25 PM »

Quote from: Saber569r;64092

I'd say the the hybrid Sphinx is about two quad lengths faster the my 350. But this in straight line drags or the big cinder hills. The crap Sphinx I bought before yours was about the same as the 350.

So happy I didn't buy that sphinx from ya, lol

Robsessed86 · « **Reply #32 on:** February 02, 2016, 05:45:03 PM »

I used to have a Esr 330 +4 stroke few years ago and now have a sphinx 363 and its a night and day difference in power from top to bottom. Both being mid-top ports. I liked my 330 stroker but in love with the noticeable difference of the sphinx. I say save up for a few months and do it right the first time. Its an occasional ride but you want it to put the biggest smile on your face as possible without breaking the bank. Imo the extra funds for a sphinx 363 is well worth it. Just make sure you go with a known builder.

Saber569r · « **Reply #33 on:** February 03, 2016, 12:42:48 PM »

Quote from: fast350r;64093

So happy I didn't buy that sphinx from ya, lol

For sure. Sold to a guy in Oklahoma. The second motor he sent was ok but the first broke every time I ran it. Dudes a pos, banned me for life a saying what happened.

Grande huevos · « **Reply #34 on:** February 04, 2016, 09:44:00 AM »

I've decided I'm going to send my current 330 to bubba Ramsey for a port job, cut a new dome, bore and fit new piston. Then I'm going to start gathering some parts for a new build for next year that way I'm not so rushed and end up getting something I'm not sure of... I'm going to try and get the new ESR cases new set of gears Yukon or something similar and I'm going to go with a 350 and 4 mil crank and send it out somewhere.

Tbone07 · « **Reply #35 on:** February 04, 2016, 09:54:24 AM »

Quote from: Grande huevos;64141

I've decided I'm going to send my current 330 to bubba Ramsey for a port job, cut a new dome, bore and fit new piston. Then I'm going to start gathering some parts for a new build for next year that way I'm not so rushed and end up getting something I'm not sure of... I'm going to try and get the new ESR cases new set of gears Yukon or something similar and I'm going to go with a 350 and 4 mil crank and send it out somewhere.

That sounds like a great plan to me. Bubba ports some mean motors

The_Steve_Man · « **Reply #36 on:** February 04, 2016, 11:02:12 AM »

You better get a hold of Bubba and get on the list. He is busy all the time. Especially with tax refunds, he will be booked for months.

Sent from my KFFOWI using Tapatalk

Grande huevos · « **Reply #37 on:** February 04, 2016, 12:06:22 PM »

Quote from: The_Steve_Man;64144

You better get a hold of Bubba and get on the list. He is busy all the time. Especially with tax refunds, he will be booked for months.

Sent from my KFFOWI using Tapatalk

I spoke with him yesterday and I am on the list he's thinking it will be back in my hands mid March. That will give me 2-3 weeks to get her broke in

hickwheeler · « **Reply #38 on:** February 04, 2016, 01:54:39 PM »

This is a little bit of a slower time for Pete at hybrid. He just got mine done in 2 weeks. It might be worth your time to give him a call. He is a great guy to deal with.

Grande huevos · « **Reply #39 on:** February 15, 2016, 07:07:04 PM »

I decided on building the 363 amd Pete @ Hybrid is building the whole thing.. I was wondering what kind of gearing you all were running? I had 13/38 on my 330 and it seemed pretty nice but figured with the new motor maybe I'd change it up? Also how many of you guys with the 350 and 363 are running stock transmissions? Any problems with them?

Skeans1 · « **Reply #40 on:** February 15, 2016, 07:27:49 PM »

Quote from: Grande huevos;64663

I decided on building the 363 amd Pete @ Hybrid is building the whole thing.. I was wondering what kind of gearing you all were running? I had 13/38 on my 330 and it seemed pretty nice but figured with the new motor maybe I'd change it up? Also how many of you guys with the 350 and 363 are running stock transmissions? Any problems with them?

Seems like I ran a 14/38 with a 22" 8 paddle hauler, and I also ran a stock cyroed transmission without any issues well I had the setup.

havinnoj · « **Reply #41 on:** February 15, 2016, 09:23:09 PM »

Quote from: Grande huevos;64663

I decided on building the 363 amd Pete @ Hybrid is building the whole thing.. I was wondering what kind of gearing you all were running? I had 13/38 on my 330 and it seemed pretty nice but figured with the new motor maybe I'd change it up? Also how many of you guys with the 350 and 363 are running stock transmissions? Any problems with them?

How much do you weigh and what tires are you running? I liked 13-39 on a 343 with 71+ R/O 22x11x8 SLS 10 paddle Extremes weighing 210 or so.

Grande huevos · « **Reply #42 on:** February 15, 2016, 10:37:56 PM »

Quote from: havinnoj;64670

How much do you weigh and what tires are you running? I liked 13-39 on a 343 with 71+ R/O 22x11x8 SLS 10 paddle Extremes weighing 210 or so.

With my gear on I am 170-175 and in the dirt I ride gncc holeshots 20x10-9. And in the sand I ride skat trek haulers 20x10-8 8paddle

F-Red · « **Reply #43 on:** February 16, 2016, 12:42:03 PM »

Quote from: Grande huevos;64663

I was wondering what kind of gearing you all were running? Also how many of you guys with the 350 and 363 are running stock transmissions? Any problems with them?

Running 14/38 with stock tranny. So far so good.