Author Topic: Pipe choice questions.... (Read 3958 times)

fx4pitrone · « **on:** August 15, 2013, 11:32:57 PM »

I have 3 pipes and need to decide which one to use....
ESR trx-6 pipe
PT Type 6 pipe
FMF pipe (can't remember which one exactly, Ill find out)...
Motor (stock cyl) will have a mid-range port...

I wand more low to mid range, and more torquier easier to ride power, but w/ good all around power. Not concerned w/ much power up top, because the wood/trails we ride don't usually allow for that. I want to be able to torque it up a rocky hillclimb w/ some technical spots and big rocks that I can't barrel over...

Which pipe will be my best bet?
And what is the trx-6 pipe best at? I see it's no longer offered....
Thanks!

Michael88R · « **Reply #1 on:** August 16, 2013, 01:19:30 AM »

I would go with the trx6. It is an mx/woods pipe. Not much different than the trx7 that they offer now. The PT type 6 is strictly a woods pipe. The trx6 would be better all around, but still have better low/mid than the other ESR pipes. If you have a fatty pipe, the TRX6 would probably have better low/mid over it too. Try the trx6. If you still want more low end, then try the PT6.

etccb · « **Reply #2 on:** August 16, 2013, 08:08:36 AM »

I would start off with the trx6. I have never ran a pt type 6 myself but the trx6 has a large woods fan base. Go from there.

fx4pitrone · « **Reply #3 on:** August 16, 2013, 09:17:22 AM »

Thank you for the replies... good to hear as I didn't know the trx6 was a mx/woods pipe...I'll start w/ that one!!:smile-new:

Tbone07 · « **Reply #4 on:** August 16, 2013, 09:51:13 AM »

You should let me try out that PT Type 6

Rupp250 · « **Reply #5 on:** August 16, 2013, 10:10:11 AM »

Try them all and see which one you like to ride with the most......

fx4pitrone · « **Reply #6 on:** August 16, 2013, 10:47:42 AM »

Haha Tbone maybe... if this trx6 pipe is the ticket, it may be up for sale!