Author Topic: Hinson quick change cover... (Read 6848 times)

Snowmaker10 · « **on:** September 28, 2013, 05:25:44 PM »

I have a Hinson style quick change cover with a new burgard cover. I'd like 250$ shipped with insurance. Will have to rebuild water pump. You pay PayPal fees.

jamieg45 · « **Reply #1 on:** September 28, 2013, 06:09:11 PM »

That is a great price Doug, free bump and a great guy to deal with. Good luck with the sale man.

Pumashine · « **Reply #2 on:** September 28, 2013, 06:14:28 PM »

What is the finish on the clutch cover?

DnB_Racing · « **Reply #3 on:** September 28, 2013, 06:15:41 PM »

Quote from: Snowmaker10;13277

I have a Hinson style quick change cover with a new burgard cover. I'd like 250$ shipped with insurance.

great price!!! is this an original hinson type? and what year

Snowmaker10 · « **Reply #4 on:** September 28, 2013, 06:17:06 PM »

Ya, I took a actual Hinson cover off from this and put this new one on.

DnB_Racing · « **Reply #5 on:** September 28, 2013, 06:19:27 PM »

Quote from: Snowmaker10;13287

Ya, I took a actual Hinson cover off from this and put this new one on.

no not the quick cover the clutch cover itself, the Hinson has a different back mount then the CT and Duncan type, if there is a weld on the inside holding a ring its the latter of the two

if you have a pic from the back I can show the difference better, the CT type has a aluminum mounting plate welded were the cover was cut, and the hinson doesn't have welds it a little different design I actually like the welded ring type better, but IMO the original type is worth a little more

Snowmaker10 · « **Reply #6 on:** September 28, 2013, 07:10:15 PM »

I have a ct one as well and it's the exact same as it is. They cut the cover and welded a mounting plate to the cover.

DnB_Racing · « **Reply #7 on:** September 28, 2013, 07:35:56 PM »

Quote from: Snowmaker10;13293

I have a ct one as well and it's the exact same as it is. They cut the cover and welded a mounting plate to the cover.

ok thanks I was looking for the other type I've got a couple of this type also and was looking for an original Hinson

not that there is anything wrong with this type, like I said I think its a better looking design but just wanted one of the other types ...what year is this from?

non the less great price anyways im surprised its not already sold

Snowmaker10 · « **Reply #8 on:** September 28, 2013, 07:37:44 PM »

It's an 89 I believe. That's the one that does not require a spacer on the kick start shaft correct?

DnB_Racing · « **Reply #9 on:** September 28, 2013, 07:41:16 PM »

ya 88/89 don't need the spacer

Snowmaker10 · « **Reply #10 on:** September 28, 2013, 09:44:30 PM »

Quote from: Pumashine;13284

What is the finish on the clutch cover?

Tony, I'm not a 100% sure what the finish is. And Jamie, thanks bud!

Pumashine · « **Reply #11 on:** September 28, 2013, 09:50:16 PM »

It looks to be primer? or bare? Just could not tell.

Snowmaker10 · « **Reply #12 on:** September 28, 2013, 10:08:18 PM »

It's not bare but it's not original or primer either. I am not sure what it is.

Snowmaker10 · « **Reply #13 on:** September 30, 2013, 12:03:01 AM »

Still for sale guys.

31aford · « **Reply #14 on:** January 21, 2014, 08:55:30 PM »

Is the clutch cover still available. Thanks