TRX250r.org

Author Topic: Porting that does not break the bank  (Read 9262 times)

Offline aberegg05

Porting that does not break the bank
« on: October 04, 2013, 05:44:36 PM »
who should I go to for the best porting for a decent price without breaking the bank?

Offline kb250r

Porting that does not break the bank
« Reply #1 on: October 04, 2013, 06:05:19 PM »
First question you gonna get is what type of riding you gonna do with it....Best to give as much info as you can on you setup...That way the guys can help you alittle better....
Atc - 350 6mill
Atc - 350 4mill
Trx - 431 puma

Engineered by C-Leigh Racing

Offline aberegg05

Porting that does not break the bank
« Reply #2 on: October 04, 2013, 06:20:04 PM »
mostly woods hill shooting. mid to high range porting.

Offline 250r86

Porting that does not break the bank
« Reply #3 on: October 04, 2013, 07:06:35 PM »
I just got my cylinder back from Herr jugs racing. He is reasonable and a really nice guy. It looks really nice, but I haven't put it together yet to see how it runs. Good luck.

Offline broken1

Porting that does not break the bank
« Reply #4 on: October 04, 2013, 07:52:29 PM »
Quote from: 250r86;13911
I just got my cylinder back from Herr jugs racing. He is reasonable and a really nice guy. It looks really nice, but I haven't put it together yet to see how it runs. Good luck.

If you haven't put the cylinder on yet would you mind posting pictures of the port work? I ported my own cylinder & would like to see how it compares to a professional job.

Offline trx250scar

Porting that does not break the bank
« Reply #5 on: October 04, 2013, 08:20:22 PM »
Quote from: aberegg05;13904
who should I go to for the best porting for a decent price without breaking the bank?


before you decide on a builder give arlan with led performance a call. see what he can do for you. this guy after a short phone conversation can really impress you with all the knowledge he has. i havent had him build me a complete motor but i wish i would have. all of your performance upgrades will cost obviously, but some will cost you more in the long run. having a knowledgeable builder on the build from the start goes a long way. i will tell you he has been a grate help so far helping me sort out the mess another builder left me with.just try not to build(although i know its hard when u think builder x is $300 less then builder y) by up front price as some builders will leave you with a darn mess and more than $300 in fix its. good luck.

Offline 250r86

Porting that does not break the bank
« Reply #6 on: October 04, 2013, 08:27:43 PM »
I just tried to post pictures from my smart phone. I hope it works

Offline 250r86

Porting that does not break the bank
« Reply #7 on: October 04, 2013, 08:44:12 PM »
I can't get pictures to upload on here from my phone.

Offline Bigred

Porting that does not break the bank
« Reply #8 on: October 04, 2013, 08:46:29 PM »
C leigh and arlen   they suppory ud with good prices id like to say support them for one main reason anywhere u go these guys names come up they know, love, support, and are still doing the r when others have gone to 4 strokrs and dont want to do 2 strokes.   Just my.02
1986 R
260cc oem cylinder
tc ported
38mm as carb
boyseen reeds
Ohlins front shocks
redone oem rear shock
93 pump fuel
cool head inline temp gauge

Offline brokeass

Porting that does not break the bank
« Reply #9 on: October 04, 2013, 10:58:58 PM »
herr jugs sent my motor back with the counter balancer off 180 degrees and a .96 squish. So next time ill be calling neil or arlan

Offline F-Red

Porting that does not break the bank
« Reply #10 on: October 05, 2013, 09:20:55 AM »
Quote from: aberegg05;13904
who should I go to for the best porting for a decent price without breaking the bank?

Neil Pritchard (C-Leigh Racing) port work! :sign0188: There may be equal, but not a better person, to deal with. :eagerness:
Want To See My Wieners?

Offline jcs003

Porting that does not break the bank
« Reply #11 on: October 05, 2013, 10:07:53 AM »
ken did my engine and the porting is excellent.

http://www.kenoconnorracing.com/Two%20Stroke%20Cylinder%20Porting.html

john

Offline udontknowme

Porting that does not break the bank
« Reply #12 on: October 05, 2013, 11:08:12 AM »
Quote from: brokeass;13931
herr jugs sent my motor back with the counter balancer off 180 degrees and a .96 squish. So next time ill be calling neil or arlan

thats funny. good thing you caught it. alot of people would of rode it like that and not had a second thought  hahahahahhhahhha
to much power is almost enough

Offline dlunn

Porting that does not break the bank
« Reply #13 on: October 05, 2013, 12:23:46 PM »
Quote from: F-Red;13940
Neil Pritchard (C-Leigh Racing) port work! :sign0188: There may be equal, but not a better person, to deal with. :eagerness:


Agreed.  I had Neil port my cylinder and it runs great and he's a really nice guy to deal with and is really passionate about 250R's.

Offline brokeass

Porting that does not break the bank
« Reply #14 on: October 05, 2013, 03:30:29 PM »
Quote from: udontknowme;13944
thats funny. good thing you caught it. alot of people would of rode it like that and not had a second thought  hahahahahhhahhha

I can't take credit. My buddy (quick310r) is an R whiz and and checked out my motor when I got it back. I'm sure other banshee builders know how to build R motors but go ahead and pass on Herr

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38