Author Topic: OEM un-cut plastics, Nac's, Hand Guards, tank, Rad, Hubs, etc. (Read 5022 times)

beobe99 · « **on:** May 03, 2014, 05:06:04 PM »

What's up guys? So I'm doing a bit of a clean out with more to come! Prices are shipped within the continental US and include fee's! (paypal as gift please).

Pick up only for the plastics (Phila. PA area).

-OEM Plastics UN-cut.. There is one crack that can be seen in the pic near the hood area along with tiny hairline cracks in the same area. These look like they were wet sanded to be polished back up so they're dull. $250 (will not ship, scared too, and don't even know were to start getting a box)

-OEM Rad good shape $45 (shipped)

-NAC's bar clamp 7/8 $25 (shipped) (the MC guard in the pic is sold)

-Hand guards (didn't work with my Easton Bars and twist throttle) $45 (shipped)

-Hubs (red) and nuts $40 (shipped)

-NEW White Maier hood smooth $35 (shipped)

email me if interested - beobe99@aol.com

broken1 · « **Reply #1 on:** May 03, 2014, 07:31:19 PM »

PM sent. Thanks.

jyd250r · « **Reply #2 on:** May 03, 2014, 08:38:29 PM »

is a rad guard with fins still available

beobe99 · « **Reply #3 on:** May 03, 2014, 08:54:50 PM »

Quote from: jyd250r;33003

is a rad guard with fins still available

It is, I will only sell all 3 though so you would have 2 with the aluminum fins and one extra oem plastic cage. $30 shipped.

Email me if your interested still. beobe99@aol.com

beobe99 · « **Reply #4 on:** May 03, 2014, 09:27:09 PM »

I made a mistake on the swingarm (fixed it above), it's from a 86 / 87 if I'm correct, not 89 like I originally posted. It can still be used on an 88 / 89 if I'm correct with the use of the rear lower mount with tab's cut (I have this piece).

beobe99 · « **Reply #5 on:** May 06, 2014, 10:41:07 AM »

TTT

Tank, Rad guards, and Nac MC cover shipped / sold.

beobe99 · « **Reply #6 on:** May 09, 2014, 08:09:33 PM »

Bump..

Hopefully some of you guys started getting your parts in the mail... Keep the offers coming!

chadj1980 · « **Reply #7 on:** May 10, 2014, 01:00:47 AM »

pm'd on arm...

beobe99 · « **Reply #8 on:** May 11, 2014, 01:40:42 PM »

Quote from: chadj1980;33609

pm'd on arm...

Got your PM and replied to your email with some more pics... Let me know,

Bob

beobe99 · « **Reply #9 on:** May 14, 2014, 01:42:53 PM »

Trusty2stroke · « **Reply #10 on:** May 30, 2014, 01:25:58 PM »

Are the hand guards still available and are they for 7/8 bars?

Sent from my iPhone using Tapatalk

beobe99 · « **Reply #11 on:** June 05, 2014, 02:58:33 PM »

Quote from: Trusty2stroke;35339

Are the hand guards still available and are they for 7/8 bars?

Sent from my iPhone using Tapatalk

Sorry for the delay in response here, I did reply to your PM. The guards are still available.

The_Steve_Man · « **Reply #12 on:** June 05, 2014, 03:39:43 PM »

Thats an 85 atc swingarm

beobe99 · « **Reply #13 on:** June 05, 2014, 06:12:17 PM »

Quote from: The_Steve_Man;35855

Thats an 85 atc swingarm

Thank you for the heads up!