Author Topic: Puma or sabertooth? Which do you prefer for a drag hillshot motor and why? (Read 10583 times)

trx250-86 · « **Reply #15 on:** October 04, 2014, 04:57:11 PM »

Quote from: Mickkey82984;43856

Dude is so full of shit it's not even funny, he lied to me from the start with my sphynx build then banned me when I said any thing besides xxx is the best. And kasey keep your mouth shut, I could give a shit what your worthless paid for replay is.

what happened to your sphynx ?

Mickkey82984 · « **Reply #16 on:** October 04, 2014, 05:10:52 PM »

Quote from: trx250-86;43861

what happened to your sphynx ?

Sold it to a guy on .net, told him everything that happened with the first motor but tge coc seems to built quite a name for him self with all his paid advertisers.

etccb · « **Reply #17 on:** October 04, 2014, 05:13:59 PM »

I personally loved this part of his reply..

"Then again; "HONESTY" is a hard pill to swallow for some isn't it? 'DISHONESTY" is the easier path for those that just don't get it or care...!"

That is absolutely the best example of the pot calling the kettle black that I have ever seen.

trx250-86 · « **Reply #18 on:** October 04, 2014, 05:19:31 PM »

Quote from: Mickkey82984;43862

Sold it to a guy on .net, told him everything that happened with the first motor but tge coc seems to built quite a name for him self with all his paid advertisers.

oh i remember something with the head studs broke off or something not quite sure. did somthing happen to the second motor ?

Mickkey82984 · « **Reply #19 on:** October 04, 2014, 05:33:15 PM »

The 2nd motor ran pretty good then would not start. After a week of trying I found he had removed the cr 250 Stator plate and they did not thighten the bolts so the timing was way off and would not start. I also asked for hill shot drag porting and polished cases got black cases and mx porting. And a claim drag porting won't work at 7000 feet even though I have friends with drag ported lt 500's and a couple 4mm drag banshees running up here no problem.

trx250-86 · « **Reply #20 on:** October 04, 2014, 05:41:46 PM »

Quote from: Mickkey82984;43866

The 2nd motor ran pretty good then would not start. After a week of trying I found he had removed the cr 250 Stator plate and they did not thighten the bolts so the timing was way off and would not start. I also asked for hill shot drag porting and polished cases got black cases and mx porting. And a claim drag porting won't work at 7000 feet even though I have friends with drag ported lt 500's and a couple 4mm drag banshees running up here no problem.

That sucks about your situation. Atleast it ran good

mennis1971 · « **Reply #21 on:** October 04, 2014, 07:39:46 PM »

You guys don't even wanna know the BS PM's I've got from that BSing "builder"(BWAHAHA-that cracks me up calling him one) over the last week over sabers and I don't even own one and will NEVER build one. He hit me with all kinds of honesty chit too. Funny that it was coming from him, of all people. Guess he's been snooping on this forum trying to fig out the chatbox changes(in that thread), cuz that was where I had made my comment about the sabers. He must be really bored with not much work to be bothering me. I'm not a drag guy and have no interest in those motors. He wants me to try to disprove his "exclusive and sole distribution" of those sabers and etc... It's not even worth my time to try to! Guess I'm not the only one he's been bothering abt that? I didn't even plan on mentioning it cuz I don't wanna give them any free publicity.

etccb · « **Reply #22 on:** October 04, 2014, 08:09:08 PM »

I hear you. Him talking about honesty and other people being dishonest just blows me away. SHOCKING!!!

Mickkey82984 · « **Reply #23 on:** October 05, 2014, 12:57:08 PM »

Yeah he must even lie to himself, when he first showed up on the old site he was a xxx customer asking the dumbest newbie questions and then point everyone to his local builder xxx. Turns out he was the owner the whole time. The coc being honest lol never will happen.

udontknowme · « **Reply #24 on:** October 05, 2014, 01:06:10 PM »

whats wrong with alittle lie every now and then :biggrin-new:

Mickkey82984 · « **Reply #25 on:** October 05, 2014, 01:23:50 PM »

My favorite quote why not support the company that saved the saber. In all reality he killed the saber, who would buy a saber from someone who has never built one and can't even build a puma right?

atv fan 28 · « **Reply #26 on:** October 05, 2014, 02:25:03 PM »

FYI.... I know where 3 brand new Saber cylinders are if anybody wants one. And the person who has them, has actually built a Saber.

Pumashine · « **Reply #27 on:** October 05, 2014, 03:43:00 PM »

Quote from: Mickkey82984;43912

My favorite quote why not support the company that saved the saber. In all reality he killed the saber, who would buy a saber from someone who has never built one and can't even build a puma right?

Lies, lies, lies I tell you. XXX builds the worlds fastest Puma's. So fast, one has never been seen. As for all the Sabers he has built, there must be a fast one out there somewhere????Just have to find one he bought second hand built by Hybrid!

udontknowme · « **Reply #28 on:** October 05, 2014, 04:45:55 PM »

unfortunatly theres a sucker walking through the door everyday. other wise xxx would of been in shambles years ago and folded up like a cheap suit by now

Tbone07 · « **Reply #29 on:** October 05, 2014, 11:43:03 PM »

Now that the ass clown claims he has the Saber market cornered, i'd just buy a Puma if i were you. I wouldn't give him my pocket lint, much less my money