Author Topic: NO-Link Intake (Read 32318 times)

ytman · « **Reply #75 on:** August 28, 2015, 10:38:16 PM »

http://trx250r.org/attachment.php?attachmentid=9356&d=1393860703&thumb=1
I'm sorry I'm not much help but this pic is of a mock up compressed shock with Roll no linkarm and stock upper mount.
I think you may be in the ball park with the compressed angle of that set up. Compressing the shock may help but not much.

troybilt · « **Reply #76 on:** August 29, 2015, 10:50:20 AM »

Here is the final box and intake I've drawn up for the the CRF hybrid. I think the same box will work with many of the 250r hybrids, but the intake will be different. If its shorter I could do other materials besides mandrel bending aluminum tubing and welding sections. This box has my vents on the side but covered with hydrophobic material, pretty cool stuff. The filter is tucked as high up and far back as possible. The seat will actually be the lid for the filter.

Oh and based on your pics I changed the compressed shock angle to 15 degrees that made a big difference in clearance.

Sky · « **Reply #77 on:** August 29, 2015, 11:49:06 AM »

Troy you are Bad Ass Sir… That's all. :encouragement:

troybilt · « **Reply #78 on:** August 29, 2015, 11:55:36 AM »

LOL Thanks Sky...

ytman · « **Reply #79 on:** August 29, 2015, 08:35:38 PM »

http://i40.tinypic.com/25swyvr.jpg
Troy, Is the subframe on the machine you scanned tapered like this one? The top rails in your scan seem to be parallel and every subframe I've seen is tapered. Maybe a non issue.......
What Sky said...

Tbone07 · « **Reply #80 on:** October 20, 2015, 01:22:57 PM »

Well I sucked in water/mud and cut my GNCC racing short this past Saturday Troy. Figured I would bump this up lol

troybilt · « **Reply #81 on:** October 23, 2015, 07:36:43 AM »

Sorry I dropped the ball, haven't had a much time to work on it. I'm hoping that all changes in the next few weeks. I've got to get thru somethings then my time should open up significantly mid-Nov..

bholzgen · « **Reply #82 on:** October 25, 2015, 11:23:09 PM »

What is everyone running for their no link on a stock frame?

Tbone07 · « **Reply #83 on:** October 26, 2015, 05:18:18 PM »

Quote from: bholzgen;60387

What is everyone running for their no link on a stock frame?

Pro-Tect fabrication airbox

bholzgen · « **Reply #84 on:** October 26, 2015, 07:14:21 PM »

I have seen them before. They are extremely hard to find.

Skeans1 · « **Reply #85 on:** December 09, 2015, 04:31:33 PM »

Quote from: troybilt;60313

Sorry I dropped the ball, haven't had a much time to work on it. I'm hoping that all changes in the next few weeks. I've got to get thru somethings then my time should open up significantly mid-Nov..

Troy any update on your intakes?

troybilt · « **Reply #86 on:** December 10, 2015, 11:23:18 AM »

Just sent rablack the intake and airbox for testing, left yesterday. Hope to get back rolling on these while I have some time off work.

Tbone07 · « **Reply #87 on:** December 13, 2015, 07:53:41 PM »

Quote from: troybilt;61805

Just sent rablack the intake and airbox for testing, left yesterday. Hope to get back rolling on these while I have some time off work.

Nice! Patiently waiting for [MENTION=100]rablack21[/MENTION]

rablack21 · « **Reply #88 on:** December 14, 2015, 08:07:03 AM »

Quote from: Tbone07;61887

Nice! Patiently waiting for [MENTION=100]rablack21[/MENTION]

Don't draw together the lynch mob just yet, Tbone. I haven't received it yet! LOL. Besides, he sent me the standard link setup.

Burns363R · « **Reply #89 on:** December 14, 2015, 09:30:14 AM »

Thats the one im wanting bad. Cant wait to hear Ryan.