TRX250r.org
« previous next »
Pages: [1]   Go Down

Author Topic: stator question  (Read 1733 times)

Offline dirtyd

stator question
« on: July 09, 2015, 04:15:18 PM »
I have a stator that tests just under the specified range in ohms. The manual says 50-250 ohms but I get a reading of 40 ohms on two different meters. would this cause a no spark issue?
Logged
87 trx250r- ESR 310 (trx9 porting) trx5 pipe, 38mm A/S, +2 a-arms. works triple rates.
86 trx250r- basically stock (SOLD)
05 Predator 500- some bolt on stuff
87 Tecate4- new project

Offline Jerry Hall

stator question
« Reply #1 on: July 09, 2015, 10:19:21 PM »
Quote from: dirtyd;55952
I have a stator that tests just under the specified range in ohms. The manual says 50-250 ohms but I get a reading of 40 ohms on two different meters. would this cause a no spark issue?

50 to 250 ohms is a very wide range. What manual are you using?   Are you testing the pickup up or the ignition source coil on the stator?
Logged

Offline dirtyd

stator question
« Reply #2 on: July 10, 2015, 07:53:11 AM »
thats what it says in the Honda service manual and the Clymer's for the exciter coil (red/black to ground)
Logged
87 trx250r- ESR 310 (trx9 porting) trx5 pipe, 38mm A/S, +2 a-arms. works triple rates.
86 trx250r- basically stock (SOLD)
05 Predator 500- some bolt on stuff
87 Tecate4- new project
Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38