Author Topic: How much power will a stock tranny stand (Read 10837 times)

motofool250r · « **Reply #15 on:** July 06, 2013, 10:49:48 AM »

Quote from: Rupp250;1081

I just bought a complete motor. I will be taking it completely apart and having these guys cryo it.
http://www.performancecryogenics.com/

what did they quote you for a charge?

i wonder how it would affect things if you sent in an assembled motor/bottomend

Rupp250 · « **Reply #16 on:** July 06, 2013, 10:56:29 AM »

I haven't had it all quoted but I talked to the guy at an off road race he was sponsoring. The prices he was throwing out there were not outrageous. The parts have to be completely oil free for him though.

And I am not sure of what will be going back on top of those cases just yet.

363 stroker · « **Reply #17 on:** July 06, 2013, 01:27:49 PM »

Quote from: motofool250r;1074

you bought them this year? i called about 8months ago tryign to stir up more sets being produced he was not interested but had my name on a list if they were made. care to elaborate?

I believe I bought them in the fall of 2011. I had a set of pep zps built by mark about a year earlier. So I called him up asking about gears and he told me he had one set left but it was used. So I told him if the were in good shape I would take them. So Mark had them sonic checked ( I can't think of the right word ) to make sure there was no cracks in them. They checked out good so I just threw my motor in a box and shipped it to him and he installed them. I have very little ride time on them but so far so good.

traxman · « **Reply #18 on:** July 07, 2013, 01:57:01 AM »

I bought the last McCoy billet tranny.. I actually bought 2 but was refunded 1/2 when he realized he had only one left. We should start a thread on serious buyers for a billet 5 speed STANDARD transmission because he told me it's in the works for these bigger duners.. Maybe with enough interest and money down the ball would get rolling...

motofool250r · « **Reply #19 on:** July 07, 2013, 09:16:49 AM »

Quote from: traxman;1361

I bought the last McCoy billet tranny.. I actually bought 2 but was refunded 1/2 when he realized he had only one left. We should start a thread on serious buyers for a billet 5 speed STANDARD transmission because he told me it's in the works for these bigger duners.. Maybe with enough interest and money down the ball would get rolling...

welcome to forum Damon, i would buy a billet oem ratio,

havinnoj · « **Reply #20 on:** July 07, 2013, 04:12:37 PM »

Quote from: traxman;1361

I bought the last McCoy billet tranny.. I actually bought 2 but was refunded 1/2 when he realized he had only one left. We should start a thread on serious buyers for a billet 5 speed STANDARD transmission because he told me it's in the works for these bigger duners.. Maybe with enough interest and money down the ball would get rolling...

I'm on board for a non-override set as well. I talked to Nate about this 6-8 months ago and he didn't know if there'd be a lot of interest. It'd be great to get a serious buyer list together and get this moving.

Morse250r · « **Reply #21 on:** July 07, 2013, 08:53:45 PM »

I've heard one of nates billet trans breaking. And I currently may have the second once I tear into my locked up lower end Later this week. He has said if he does then again they would be non overridden

Polonda · « **Reply #22 on:** July 07, 2013, 08:57:09 PM »

Still hate hearing the news on your trans morse. Hopefully it's not a $$$$ fix.

atv fan 28 · « **Reply #23 on:** July 07, 2013, 09:02:07 PM »

I hope mine holds up to my lil motor...

Polonda · « **Reply #24 on:** July 07, 2013, 09:08:37 PM »

Morse do you know what broke on the other billet you know about? Second gear? I've heard Nate doesn't have any left so hope you can get parts.

atv fan 28 · « **Reply #25 on:** July 07, 2013, 09:12:00 PM »

I think John broke 1st gear...

atv fan 28 · « **Reply #26 on:** July 07, 2013, 09:13:41 PM »

BAM Racing might make more gears for Nate??..

Morse250r · « **Reply #27 on:** July 07, 2013, 09:17:35 PM »

Bam or Albright motors? He told John he had replacement gears but at 300 a piece. Ill be real upset if there is a broken gear in there I'm hoping for a simple fork or stuck in gear. Like I said I'll tear it down this week and will post the findings

atv fan 28 · « **Reply #28 on:** July 07, 2013, 09:19:55 PM »

BAM= Bob Albright Motors

traxman · « **Reply #29 on:** July 08, 2013, 01:06:06 AM »

Quote from: Morse250r;1632

I've heard one of nates billet trans breaking. And I currently may have the second once I tear into my locked up lower end Later this week. He has said if he does then again they would be non overridden

Nate has had 2 or 3 breaks all coming from the oem countershaft teeth failing and ruining first gear. He was talking about upping the cost and including a stronger countershaft along with the tranny. Will the billet no overridden would be the same gear ratios he offers now and only a 5 speed..