Carb parts

[Braaaping247]

Want to buy dgh, cel, and any other needle that's good, 
Looking for 6-7-8 slides pwk38 airstriker. Text for faster response 609-531-1016

[havinnoj]

JetsRUS is your best bet:
https://www.jetsrus.com/a_jets_by_carburetor_type/needle_keihin_N427-48.html

[Braaaping247]

JetsRUS is your best bet:
https://www.jetsrus.com/a_jets_by_carburetor_type/needle_keihin_N427-48.html

I appreciate that,  i was hoping to get someone that wanted to sell a bunch of used needles,  jets and slide for a good price. Maybe someone thats done tinkering with there carbs and wants to of a collection of jets needles and slides. 
But if not I'm thinking about going on the rich side always,  so i was looking at cel, dgh needless.  Any thoughts also are those zoom zoom power air/fuel screws worth buying.  I know they are when it comes to tuning on the fly. But i read they don't seat properly.  And thoughts.

[Hawaiiysr]

Zoom zoom?

[broken1]

Those are just an air screw & all your gaining from installing one is just not having to use a small screw driver to make the same adjustment. Not only that the zoom zoom air screws are aluminum & made in china plus where the air screw is located it would be sticking out the side making it possible to snap it off. Personally I'd stick with the brass air screws.

[Braaaping247]

Understandable,  i said zoom zoom,  but it's actual a company that makes them here in the USA, i would need to run out and look on mine,  but there good for not having to use a screw driver,  and leaning over and adjusting on the fly.  I think the company might be zap, zep something like that.  It's suggested here in the jetting 101 guide on this forum

[Hawaiiysr]

https://slavensracing.com/shop/2-stroke-idle-screw-keihin-mikuni-slavens/

like this? I have one of these. never used it though

[havinnoj]

Those have always intrigued me but I have never pulled the trigger.  I could see them being of benefit for big changes in elevation or air pressure.