Author Topic: Tie Rod Ends or Heim Joints? (Read 1938 times)

87cclR · « **on:** March 22, 2015, 09:28:23 PM »

Do you run one or the other? If so, what's the reasoning? I think I'll end up running Heim Joints (spherical bearings) on my tie rods, as they offer a bit more articulation and are fairly forgiving of misalignment. I'll not be running the R in wet or muddy conditions, so that's not really an issue. Also, the Heim joints are free for me, so there's always that.

Hawaiiysr · « **Reply #1 on:** March 23, 2015, 01:32:38 AM »

If they are free then go for it. Heims wear out faster then ball joints. They are more exposed to the element. But like I said if they are free and free the next time around go for it.

rablack21 · « **Reply #2 on:** March 23, 2015, 09:16:08 AM »

^^^^^I concur.

havinnoj · « **Reply #3 on:** March 23, 2015, 10:59:55 AM »

Go ball joints. I think heims look cleaner but they are exposed, can wear-out faster, and can also squeak a bit.

JesseA420 · « **Reply #4 on:** March 23, 2015, 12:16:41 PM »

free is free

FerrinMotorsports · « **Reply #5 on:** March 23, 2015, 01:04:40 PM »

Depends upon the quality of heims as to the wear factor....IMO heims are lighter and easier to work with....They also reduce friction in the steering...