Author Topic: rear shock ressi clamp att:pumashine (Read 4879 times)

trx250scar · « **on:** September 02, 2013, 07:35:32 PM »

a while back we had a thread going about making some of these ressi clamps. were did this end up? i currently have removed all the oem mounting brackets off of my 88 oem frame and am in need of this pretty bad

The Phantom · « **Reply #1 on:** September 02, 2013, 08:00:13 PM »

I also may entertain the thought of buying a set of 3. I like to shop with my eyes though.

Pumashine · « **Reply #2 on:** September 02, 2013, 08:55:53 PM »

What frame, the stock frame has clamps. The ones I made were for the front. Ryan should have got them by now. What resi were you using?

GO OVRIT · « **Reply #3 on:** September 02, 2013, 09:43:15 PM »

I'm in need of a pair too. Fronts, oem frame, tcs shocks. They look just like the rear stock resevoir.

trx250scar · « **Reply #4 on:** September 02, 2013, 09:52:52 PM »

i need one for the rear oem ressi oem chassis as i removed all the oem mounting parts for the rear ressi

Pumashine · « **Reply #5 on:** September 02, 2013, 09:56:33 PM »

Every resi is a different diameter. When some one comes up with a universal design I will make lots. I made 2 sets for Jons PEP rezies. Shipped the same set to rablack21 and they were a 1/4" too big. Had to remake the whole set. So I will need to know the exact diameter of the resi and which frame member you are attaching to.

trx250scar · « **Reply #6 on:** September 02, 2013, 10:16:22 PM »

ok i will get you some numbers. thanks for your attention to this