Author Topic: custom wire harness (Read 9540 times)

hontrx265r · « **on:** January 29, 2014, 02:53:50 PM »

I'd like to offer these to the community. I have done several for the industry but recently finished for the 250r. Brandnew custom built harness water tight/sealed. No splicing, uses all deutch weather proof connectors aside from cdi. Oem wire codes. Labeled ends. I'm offering a basic std 250r harness for 129.00.. for the month of feb ill do 99.00 shipped. I will also do full custom for batteries, special switches, dc lighting, fused circuits, extra powers.... whatever you can dream up for 199.00. Some applications may require your components to be sent to me ahead of time for highest quality. Pm for details

DnB_Racing · « **Reply #1 on:** January 29, 2014, 05:53:25 PM »

are you selling any?

I was going to make some and sell for just over my cost which wasn't very low on account of a low amount of items ordered (I was going to keep cost under $50 to help members out but still make a few bucks for my time) but once I saw ricky stator selling custom harness for $69 I decided against it, but good luck

http://www.rickystator.com/catalog/trx250r-ignition-wiring-harness-p-578.html

bnau267 · « **Reply #2 on:** January 29, 2014, 07:54:59 PM »

Quote from: hontrx265r;23963

I'd like to offer these to the community. I have done several for the industry but recently finished for the 250r. Brandnew custom built harness water tight/sealed. No splicing, uses all deutch weather proof connectors aside from cdi. Oem wire codes. Labeled ends. I'm offering a basic std 250r harness for 129.00.. for the month of feb ill do 99.00 shipped. I will also do full custom for batteries, special switches, dc lighting, fused circuits, extra powers.... whatever you can dream up for 199.00. Some applications may require your components to be sent to me ahead of time for highest quality. Pm for details

Does it include the lighting terminals?

hontrx265r · « **Reply #3 on:** January 29, 2014, 09:43:12 PM »

They include opposite connector for components. I have been asked several times to build these but I recently aquired cdi terminals. Ricky stator has no lighting and are bare. If you don't like the price then its not for you. When you have one in your hand you will long forget about the price, before you forget about the quality. These are a professional grade part with top grade materials. I'm not making a living from these I'm very busy with bigger toys. I'm just offering what has been requested and I can't do it for free. They take time to build and seal its not a ten minute deal.If you have to have it all and have an over the top build why would you cut yourself short on one of most important parts on your R.

DnB_Racing · « **Reply #4 on:** January 30, 2014, 07:30:49 AM »

Ya i know yours are made nice. Its just makes it hard to sell when not a direct OEM replacement not many are going to want to change out there connectors...at least thats what i found out a few years ago when i looked into this same thing

Langbolt · « **Reply #5 on:** January 10, 2015, 12:15:21 AM »

Found another one from a different supplier

http://www.regulatorrectifier.com/catalog/1986-1988-Honda-TRX250R-Stator-Wiring-Harness

Looks really nice

DnB_Racing · « **Reply #6 on:** January 10, 2015, 10:34:12 AM »

Quote from: Langbolt;48543

Found another one from a different supplier

http://www.regulatorrectifier.com/catalog/1986-1988-Honda-TRX250R-Stator-Wiring-Harness

Looks really nice

that's a nice part.....

I know the materials Mike (hontrx265r) is using and they are all top quality, along with he is making a custom for LED lighting with a capacitor or I believe a battery option,

for a race cut you don't need much and I would take the one Langbolt shows, but for custom configurations Mikes are a REAL nice harness

sleepy129 · « **Reply #7 on:** January 10, 2015, 12:09:09 PM »

So is this a plug and play deal with lighting? an OEM replacement? 87r

hontrx265r · « **Reply #8 on:** January 10, 2015, 11:05:23 PM »

I build whatever you need. But yes all new, and plug and play.

Anthony0327 · « **Reply #9 on:** January 11, 2015, 02:06:42 AM »

Sounds good to me. Some of the harnesses I've aquired along the way have been brittle and rotted. If you could make a new one for me that plugs into the oem stator, lighting and control switch, I'm in. I will contact you soon. Glad to see people going the extra distance to keep our hobby alive!! Thanks!!!!

benoladdict · « **Reply #10 on:** January 26, 2015, 04:59:13 PM »

Are these still available?

sleepy129 · « **Reply #11 on:** February 21, 2015, 04:49:53 PM »

I just picked up one of his custom harnesses. very good quality. Hi highly support his work. better than OEM.

benoladdict · « **Reply #12 on:** February 21, 2015, 07:21:21 PM »

I grabbed one and I cant tell u how good this thing is. Its above and beyond. Labeled shrink wrapped correct ends a dummy could rewire with this harness.

zabdi250R · « **Reply #13 on:** March 12, 2015, 07:03:55 AM »

Just got back from vacation and found my harness waiting. this thing looks awesome, higher quality than original.

Johnboy5933 · « **Reply #14 on:** April 09, 2015, 07:39:46 PM »

How much for a light delete harness from you for an 88?? I wasn't impressed with the one I ordered from Ricky stator