Author Topic: Quinn's 86 (Read 23916 times)

Quinnlt4 · « **on:** February 24, 2014, 08:36:16 PM »

Well I have had my R for two season now and after a year of collecting parts I finally took it to get them all powder coated. the final product is almost at hand.

This is how it started a completely stock 86. Added some 450r shock and some shrouds. Think they might be some pumashine shrouds but bought them used. And some Laeger +2 Aarms.

Quinnlt4 · « **Reply #1 on:** February 24, 2014, 08:42:19 PM »

Picked up a completely bare Laeger swingarm which is 88/89 length so -1 from the 86.

Using the stock hubs and spindles. Coated the a Bengal red with metal flake.

Quinnlt4 · « **Reply #2 on:** February 24, 2014, 08:48:33 PM »

Picked up some vf3 reeds and a ESR eliminator kit.

Scored a durable +4 axle and antifade.

Cool head, FMF pipe and 38mm AS carb.

havinnoj · « **Reply #3 on:** February 24, 2014, 08:51:07 PM »

Coming along nicely!

Quinnlt4 · « **Reply #4 on:** February 24, 2014, 08:52:03 PM »

And this is how it was for the 2013 season.

Quinnlt4 · « **Reply #5 on:** February 24, 2014, 08:52:47 PM »

And now the tear down for this year.

I added a full pumashine 86 gusset kit which I have no installed pictures off... And some pumashine ressi clamps for a stock frame and stock. Shock was revalved by a local shock guy. He wanted to experiment on my rear shock which has a lot of 09 yfz rear shock internals. Performs great.

Quinnlt4 · « **Reply #6 on:** February 24, 2014, 09:03:26 PM »

Christmas goodies!!!

Jettrim custom seat cover and ESR brake and shifter. Awesome wife!!

Laeger antivibe and precision shock and vibes.

Quinnlt4 · « **Reply #7 on:** February 24, 2014, 09:09:30 PM »

Some custom axis dual rate shocks already set up for my weight!!

And now this years set of powder coated goodies.

Went with a gloss black frame and lowers with a cardinal steel flake. Doesn't show much in photos. Offset with a textured black uppers, stem, rear grab bar and bumper.

Quinnlt4 · « **Reply #8 on:** February 24, 2014, 09:13:06 PM »

T_shee customized some 450r blingstar fat pegs. He did a great job on them. Glad he wanted to sell them!

Quinnlt4 · « **Reply #9 on:** February 24, 2014, 09:16:21 PM »

And this is how it sits right now.

bholzgen · « **Reply #10 on:** February 24, 2014, 09:37:17 PM »

Dude looks good! Thats come very far since I last saw you at Silver Lake!

Who welded your gussets on? I am thinking about doing the same for next season.

Quinnlt4 · « **Reply #11 on:** February 24, 2014, 09:52:49 PM »

One of my dads friends is a professional welder. He charges a small fee, but does an awesome job. No booger welds. When I saw you, mark and Colin at SL I only had my R for like two weeks. It didn't like the 8paddle haulers and my terrible attempt at jetting the new 38mm AS.
I have gotten better at my jetting and my motor is going under RBs knife as we speak!!

bholzgen · « **Reply #12 on:** February 24, 2014, 10:00:52 PM »

I'm running an RB310 this year! Cant wait. RB does some great work you will not be disappointed!

Here is the most recent pic of my junk:

Quinnlt4 · « **Reply #13 on:** February 24, 2014, 10:22:59 PM »

Yeah. He build my yfz 450 motor, crf450 and yz250f in the past.

Higgy87trx425 · « **Reply #14 on:** February 24, 2014, 11:17:05 PM »

Good looking build man!! Nice Pics!! Looks like you're headed in the right direction, I'm diggin it!!
Thanks Higgy