Author Topic: Fabrication request (Read 14596 times)

atvmxr · « **on:** May 31, 2014, 08:30:40 PM »

[MENTION=9]Pumashine[/MENTION]

Think you can make something like this? It the oem 86-87 steering stem handlebar/headlight mount, cut up to fit over an aftermarket stem and provide way to mount headlight.

Credit to gooch on the other site

:positive:

Pumashine · « **Reply #1 on:** May 31, 2014, 08:36:26 PM »

Quote from: atvmxr;35460

[MENTION=9]Pumashine[/MENTION]

Think you can make something like this? It the oem 86-87 steering stem handlebar/headlight mount, cut up to fit over an aftermarket stem and provide way to mount headlight.

Anything can be made but this one I cannot make cost effective. If someone created this part then it is best to go to that guy to get it made.

bnau267 · « **Reply #2 on:** May 31, 2014, 10:32:27 PM »

Quote from: Pumashine;35462

Anything can be made but this one I cannot make cost effective. If someone created this part then it is best to go to that guy to get it made.

But just maybe you'll think up a new more cost friendly design!

Rupp250 · « **Reply #3 on:** June 01, 2014, 09:41:11 AM »

Most people don't want to pay for R&D for there one off project. Or they don't realize hourly shop rates are not the same across this vast country.
My local fab shops around here have a $125 per hour rate and a $150 minimum. Unless someone see that they can make several of one item, and spread the costs out, a one off gets pricey.

Pumashine · « **Reply #4 on:** December 28, 2014, 04:27:45 PM »

Heres the new 3/4" thick triple tree [MENTION=145]KASEY[/MENTION] wanted made up for his next build.

KASEY · « **Reply #5 on:** December 29, 2014, 08:58:39 AM »

YES YES YES!!!!!! pm me the details,,, and I want a plain el cheapo motor stand ,, I am going to paint it to match my new paper weight !

Pumashine · « **Reply #6 on:** December 29, 2014, 10:25:56 AM »

Quote from: KASEY;48156

YES YES YES!!!!!! pm me the details,,, and I want a plain el cheapo motor stand ,, I am going to paint it to match my new paper weight !

As per your request I am cutting TRX250r motor stands without the Honda logo for cheap$$$. Aluminum and steel.

KASEY · « **Reply #7 on:** December 29, 2014, 01:38:21 PM »

Let me know how much and i will get it done.... WOOOOOO HOOOO ready for the clamps ...

JesseA420 · « **Reply #8 on:** December 29, 2014, 02:07:59 PM »

me likey that pinch design

Pumashine · « **Reply #9 on:** April 25, 2015, 08:54:33 PM »

Kasey has alot of ideas for make trick parts for building

The small hubs have a 3 on 100mm BHC. He sent me the first pic but it is hard to duplicate because it is not to scale. I sent croat1 the pic+info and he sent me a file to cut the small hub. I modified his original file to what is now cut. Thanks Joe.

JesseA420 · « **Reply #10 on:** April 25, 2015, 09:15:41 PM »

looks sweet, i would have drawn the width of the center circle the same width as the width of the legs, the legs look a bit wider than the center circle but im sure they will work fine.

Pumashine · « **Reply #11 on:** April 25, 2015, 09:43:27 PM »

Quote from: JesseA420;53703

looks sweet, i would have drawn the width of the center circle the same width as the width of the legs, the legs look a bit wider than the center circle but im sure they will work fine.

Anything can be drawn. If it is not to scale then the physical limitations cannot be addressed.

KASEY · « **Reply #12 on:** April 25, 2015, 11:12:54 PM »

those are for ME!!!!!! OHHH MAN,, as of now i am with wood!! here is what i do...

KASEY · « **Reply #13 on:** April 25, 2015, 11:24:19 PM »

i am real excited to challenge tony, so far he has done a fantastic job on all the goodies ... true craftsman ,,,, i made some hubs out of stock hubs and then went a step higher ,, results as seen ,, wagon hubs ,, that's right wagon,,,,

KASEY · « **Reply #14 on:** April 25, 2015, 11:31:42 PM »

Quote from: JesseA420;53703

looks sweet, i would have drawn the width of the center circle the same width as the width of the legs, the legs look a bit wider than the center circle but im sure they will work fine.

we talked about that,, but i it wouldn't have looked as EXTREME and that's what i wanted,, they look perfect... bringing the imaginary second circle in helped make that happen ,, the fingers would not be as KOOOOL if you did it that way,,,,