Author Topic: Counter Balancer Timing (Read 3302 times)

The_Steve_Man · « **on:** June 10, 2014, 10:58:45 AM »

What kind of problems does the counter balancer being out of time cause? Other than vibrations.

Tbone07 · « **Reply #1 on:** June 10, 2014, 11:30:49 AM »

None that I can think of other than vibrations. Maybe rattle some nuts and bolts loose over time

Pumashine · « **Reply #2 on:** June 10, 2014, 12:12:02 PM »

The vibrations will severe all motor mounts. Don't you think they put a timing mark on it for a reason?

sameltoe · « **Reply #3 on:** June 10, 2014, 12:31:44 PM »

Is there any other marks you need to line up besides the counter balancer marks and the one on the gear next to it? I just lined those to up...but wonder if there was anymore.

The_Steve_Man · « **Reply #4 on:** June 10, 2014, 12:46:39 PM »

There is one on the crank and crank gear.

Pumashine · « **Reply #5 on:** June 10, 2014, 01:27:57 PM »

Quote from: The_Steve_Man;36235

There is one on the crank and crank gear.

I think the hotrod cranks don't have a mark at TDC like OEM to line up with the crank gear

Tbone07 · « **Reply #6 on:** June 10, 2014, 01:42:52 PM »

Quote from: Pumashine;36238

I think the hotrod cranks don't have a mark at TDC like OEM to line up with the crank gear

Surprisingly....mine did have a timing mark.

Get the piston at TDC and line up the dots on the gears and you're done

sameltoe · « **Reply #7 on:** June 10, 2014, 02:30:26 PM »

Dang it...I need to take my cover back off :-/