Author Topic: Help! Someone with an '88 or '89 with OEM headlight....... (Read 3962 times)

Jimbo45 · « **on:** March 14, 2015, 09:05:43 PM »

If someone could please measure the dimension of the headlight mounting collar, inside the washer portion, that would be awesome! I have all the parts to install my '88 style headlight, but the metal collars are unavailable. I have some metal tubing and an SS washer, that I intend to fab my own collar, but I need the dimension shown (or the overall length with the washer portion if its easier). Also, not noted on the diagram I made, but the diameter of the barrel portion that fits into the rubber bushing would be nice too! The part I am referring to, is part #3 on the partzilla link below:

http://www.partzilla.com/parts/search/Honda/ATV/1988/TRX250R+A/FRONT+FENDER+88%2C89/parts.html

hickwheeler · « **Reply #1 on:** March 15, 2015, 01:57:36 AM »

I'll get it for you in the morning

Jimbo45 · « **Reply #2 on:** March 15, 2015, 02:01:34 AM »

Quote from: hickwheeler;51614

I'll get it for you in the morning

Thank you!!!!!!!!!!!! Also, the diameter of the shaft that fits into the rubber if you can. Thanks again! Jim

hickwheeler · « **Reply #3 on:** March 15, 2015, 02:19:04 AM »

went out and got it for you now. my measurements are in mm. shank length 27.5, with washer 29. barrel size 9.5 to 10. They are not a perfectly round piece. Hope this is what you are looking for. If you need more info let me know.

Jimbo45 · « **Reply #4 on:** March 15, 2015, 02:26:41 AM »

Quote from: hickwheeler;51616

went out and got it for you now. my measurements are in mm. shank length 27.5, with washer 29. barrel size 9.5 to 10. They are not a perfectly round piece. Hope this is what you are looking for. If you need more info let me know.

Perfect! Thanks so much! I owe you one!

hickwheeler · « **Reply #5 on:** March 15, 2015, 02:29:02 AM »

no problem

Jimbo45 · « **Reply #6 on:** March 16, 2015, 02:41:20 PM »

Quote from: hickwheeler;51618

no problem

Thanks again hick wheeler, I found some bronze bushings that are the perfect diameter and length when I add a stainless fender washer to the outside! Didn't even have to cut them!

hickwheeler · « **Reply #7 on:** March 16, 2015, 02:51:31 PM »

sweet glad I could help