Author Topic: atc 200 auto-X (Read 5360 times)

JesseA420 · « **on:** July 09, 2015, 07:08:03 AM »

this was one of the first bikes i ever built along time ago. we blew it up last year after putting a bigger carb, and high comp piston in the original 200x motor.
in went the 200s motor. this motor so minty its ridiculous. it purrs like a kitten and runs like brand new.

dem3500 · « **Reply #1 on:** July 09, 2015, 11:18:23 AM »

Niceeee!

JesseA420 · « **Reply #2 on:** July 09, 2015, 11:48:00 AM »

when we began to rebuild it the first time, we couldnt decide on a color scheme so we found those tank decals, i believe from some 70's street bike, and went with gray to match the decals. i like the color scheme alot.

jcs003 · « **Reply #3 on:** July 10, 2015, 06:40:53 AM »

nice, but it appears to have too many strokes.haha

John

oldschoolmx · « **Reply #4 on:** July 15, 2015, 04:54:19 PM »

Looks awesome. Is the 200S engine a direct bolt in to the 83-85 200X?

JesseA420 · « **Reply #5 on:** July 16, 2015, 09:40:58 AM »

yes all the 200s,m etc motors are the same, as well as the old 185 motors. the only difference is pullstart instead of kick, and is automatic shifting instead of clutch shifting. motor mounts line up, u use the intake manifold from the 200x to get the carb to line up between the frame, and u have to use a 200s or m brake lever bent to go around the clutch cover side of the engine. very very simple swap and there is a surplus of these motors on ebay.

the motors also have slightly less compression so there is a little less power, but its not a big deal since the 200x isnt big on power to begin with. some pull the head and put the 200x head and piston on them to be the same powerwise, but i wasnt worried about that.

oldschoolmx · « **Reply #6 on:** July 20, 2015, 10:36:22 PM »

Yup, I'ma do it. Lol.